What To Do When your plumbing pipes burst from the cold

Winter weather can be harsh on plumbing pipes, It is not often in Houston, Texas that it is cold enough to cause them to freeze and eventually burst. A burst pipe can lead to significant water damage and costly repairs if not addressed promptly. In this blog, we’ll go over what to do if your plumbing pipes burst from the cold and how to prevent it from happening in the future.

Step 1: Turn off the water supply

The first step in dealing with a burst pipe is to turn off the main water supply. This will stop the water flow and prevent further damage. The main water supply valve is usually located near the water meter or in the basement. If you are not sure where the valve is located, you can check your home’s plumbing diagram or ask a plumber for assistance.

Step 2: Locate the burst pipe

Once the water supply has been turned off, you should locate the burst pipe. If you can see the water gushing out, then the location of the burst pipe is obvious. If not, you’ll have to look for other signs such as wet spots on the wall, ceiling, or floor, or hear the sound of running water. If you cannot locate the burst pipe, call a plumber for assistance.

Step 3: Start mopping up the water

Next, start mopping up the water to prevent further damage. If the water damage is extensive, you may need to use towels, buckets, or a mop and bucket to clean it up. If the water has leaked into the walls or ceiling, you may need to drill holes to allow the water to drain out. Be sure to keep the area dry to prevent mold growth.

Step 4: Start the repair process

Once you’ve mopped up the water, you can start the repair process. If the burst pipe is visible, you can try to repair it yourself if you have the necessary plumbing skills. You’ll need to turn off the water supply, drain the remaining water from the pipes, and then repair or replace the damaged section of the pipe. If you don’t feel comfortable performing the repair yourself, it’s best to call a plumber for assistance.

Step 5: Call your insurance company

If the damage caused by the burst pipe is significant, you may need to call your insurance company. Your homeowner’s insurance may cover the cost of repairs, but you’ll need to provide documentation of the damage. Be sure to take photos of the damage and keep receipts of any expenses you incur while cleaning up and repairing the damage.

Preventing Burst Pipes

The best way to deal with burst pipes is to prevent them from happening in the first place. Here are some steps you can take to prevent your plumbing pipes from freezing and bursting:

Insulate your pipes:

Insulating your pipes will help keep them warm and prevent them from freezing. You can buy pre-made foam insulation that fits around pipes, or you can use fiberglass insulation and wrap it around the pipes yourself.

Keep your home warm:

Keeping your home warm will help prevent pipes from freezing. You can do this by setting your thermostat to a minimum of 55°F, even when you’re not home.

Seal air leaks:

Sealing air leaks around doors, windows, and other areas will help keep your home warm and prevent cold air from reaching your pipes.

Disconnect garden hoses:

Disconnecting garden hoses from outdoor faucets will prevent water from remaining in the pipes, which can freeze and cause them to burst.

Open cabinets:

Opening the cabinets under sinks and other areas where pipes are located will allow warm air to circulate and prevent pipes from freezing.

Call Joe The Plumber if Your Pipes Burst

Don’t wait until it’s too late! If you have a burst pipe, don’t hesitate to call Joe The lumber. Our experienced and reliable plumbing professionals are available to assist you with all your emergency plumbing needs. With our prompt and efficient service, we’ll have your pipes repaired and back to normal in no time. Don’t let a burst pipe disrupt your daily life, call us today, and let us take care of the problem for you!